Labconco Cell Logic A2 User Manual page 51

Adjusting Sound
Touch [Sound]. The audible tones for various conditions or actions can be modified
and/or silenced in the sounds sub-menu as listed below. To save any changes, touch
[Save]. To exit without changes, touch [Back].
•
Touch Sounds
screen.
•
Alarm Sounds
•
Alert Sounds
options can be chosen from the drop-down menu.
•
Timer Sounds
options can be chosen from the drop-down menu.
•
Sash Sounds
notification tune. Audio options can be chosen from the drop-down menu.
Audible tones associated with alarms cannot be muted.
Selecting a Language
Touch [Language]. The current language will be displayed along the top of the
Language Selection Pop-up. Choose from the available languages:
• English
• Spanish
• French
• German
• Italian
• Chinese
• Japanese
• Portuguese
Setting the Clock
Date]. Use the Time and Date pop-up to choose Clock Format (12 or 24
Touch [Time &
hour), and then either manually set the Time and Date, or enable Auto Update, which (if
the cabinet is connected to a valid Ethernet port) will auto update the time and date.
With Auto Update the following settings need to be entered:
•
– Enter the Greenwich Mean Time (GMT) offset value for your
Time Zone
location (integer value between -12 & +12).
•
– Enter the "web address" (URL) of the NTP server (of your choice)
NTP server
that will provide clock synchronization data to the cabinet via the Ethernet
connection. A common site is: time.nist.gov
– The ON/OFF toggle enables or disables audible touch of the
– Audio tones can be chosen from the drop-down menu.
– The ON/OFF toggle enables or disables audible alert. Audio
– The ON/OFF toggle enables or disables audible timer. Audio
– The ON/OFF toggle enables or disables sash movement
51