Priority Commands (Layer 2); Queue Mode - SMC Networks 8748L2 Management Manual

Command Groups
Priority (Layer 2)
Priority (Layer 3 and 4) Maps IP DSCP tags to class of service values

Priority Commands (Layer 2)

Command

queue mode

switchport priority
default
queue bandwidth
queue cos map
show queue mode
show queue
bandwidth
show queue cos-map Shows the class-of-service map
show interfaces
switchport
queue mode
This command sets the queue mode to strict priority or Weighted
Round-Robin (WRR) for the class of service (CoS) priority queues. Use the
no form to restore the default value.
Syntax
queue mode {strict | wrr}
no queue mode
Table 4-55 Priority Commands
Function
Configures default priority for untagged frames,
sets queue weights, and maps class of service tags
to hardware queues
Table 4-56 Priority Commands (Layer 2)
Function
Sets the queue mode to strict priority or
Weighted Round-Robin (WRR)
Sets a port priority for incoming untagged
frames
Assigns round-robin weights to the
priority queues
Assigns class-of-service values to the
priority queues
Shows the current queue mode
Shows round-robin weights assigned to
the priority queues
Displays the administrative and
operational status of an interface
P C
RIORITY OMMANDS
Page
Mode Page
GC
IC
GC
IC
PE
PE
PE
PE
4-209
4-209
4-216
4-209
4-209
4-212
4-213
4-214
4-214
4-215
4-143