Dot1X System-Auth-Control; Dot1X Default; Dot1X Max-Req - SMC Networks 8708L2 - annexe 1 Management Manual

C L
OMMAND INE

dot1x system-auth-control

This command enables IEEE 802.1X port authentication globally on the
switch. Use the no form to restore the default.
Syntax
[no] dot1x system-auth-control
Default Setting
Disabled
Command Mode
Global Configuration
Example
Console(config)#dot1x system-auth-control
Console(config)#

dot1x default

This command sets all configurable dot1x global and port settings to their
default values.
Command Mode
Global Configuration
Example
Console(config)#dot1x default
Console(config)#

dot1x max-req

This command sets the maximum number of times the switch port will
retransmit an EAP request/identity packet to the client before it times out
the authentication session. Use the no form to restore the default.
Syntax
dot1x max-req count
no dot1x max-req
count – The maximum number of requests (Range: 1-10)
4-108
I
NTERFACE