Table of Contents
Advertisement
10.4 MAC Filter Screen
The MAC filter screen allows you to give exclusive access to devices (Allow) or exclude devices from
accessing the NBG7815 (Deny). Every Ethernet device has a unique MAC (Media Access Control)
address. The MAC address is assigned at the factory and consists of six pairs of hexadecimal characters,
for example, 00:A0:C5:00:00:02. You need to know the MAC address of the devices to configure this
screen.
Use this screen to change your NBG7815's MAC filter settings. Click Settings > WiFi > MAC Filter to show
following screen.
Figure 59 Settings > WiFi > MAC Filter
The following table describes the labels in this screen.
Table 34 Settings > WiFi > MAC Filter
LABEL
MAC Filter
Filter Action
MAC Address List (Max Limit : 64)
Add
Apply
Cancel
Chapter 10 Wireless LAN
DESCRIPTION
Select to turn on (Enable) or off (Disable) MAC address filtering.
Define the filter action for the list of MAC addresses in the MAC Filter Summary table.
Select Allow to permit access to the NBG7815. MAC addresses not listed will be denied access to
the NBG7815.
Select Deny to block access to the NBG7815. MAC addresses not listed will be allowed to access
the NBG7815.
This field displays the MAC address of the wireless station you want to filter.
Click
to configure the MAC address.
Click
to delete the MAC address.
Click
to add a rule in the MAC Address List.
Click Apply to save your changes back to the NBG7815.
Click Cancel to reload the previous configuration for this screen.
NBG7815 User's Guide
112
Advertisement
Table of Contents
