Table of Contents
Advertisement
2.1 Overview
This chapter describes how to access the NBG6617 Web Configurator and provides an overview of
its screens.
The Web Configurator is an HTML-based management interface that allows easy setup and
management of the NBG6617 via Internet browser. Use a browser that supports HTML5, such as
Internet Explorer 9.0 and later versions, Mozilla Firefox 21 and later versions, Safari 6.0 and later
versions or Google Chrome 26.0 and later versions. The recommended screen resolution is 1024 by
768 pixels.
In order to use the Web Configurator you need to allow:
• Web browser pop-up windows from your device. Web pop-up blocking is enabled by default in
Windows XP SP (Service Pack) 2.
• JavaScript (enabled by default).
• Java permissions (enabled by default).
Refer to the Troubleshooting chapter
functions are allowed in Internet Explorer.
2.2 Accessing the Web Configurator
Make sure your NBG6617 hardware is properly connected and prepare your computer or computer
1
network to connect to the NBG6617 (refer to the Quick Start Guide).
Launch your web browser.
2
The NBG6617 is in router mode by default. Type "http://192.168.1.1" as the website address. If the
3
NBG6617 obtains a WAN IP address or a DNS server IP address in the same subnet as the LAN IP
address 192.168.1.1, the default LAN IP address will be changed to 10.0.0.1 automatically. See
Auto-IP Change on page 64
If the NBG6617 is in access point, the IP address is 192.168.1.2. See
more information about the modes of the NBG6617.
Your computer must be in the same subnet in order to access this website address.
Introducing the Web Configurator
(Chapter 16 on page
for more information.
NBG6617 User's Guide
C
H A PT ER
149) to see how to make sure these
15
2
Chapter 4 on page 27
for
Hide quick links:
Advertisement
Table of Contents
