Replacing The Opc Module - Printronix L7032 User Manual

4.8 Replacing the OPC Module

Follow these instructions to replace the OPC module
unit and clean the printer when you replace the OPC module.
4.8.1 Open the OPC Module Kit Box
1. Open the OPC module kit box. See Figure 4-13.
2 . Make sure the box contains an OPC mod
should be preinstalled in the OPC module.
4.8.2 Clean the Printer and Replace the Spent OPC Module
Follow the instructions in Section 5.6 Monthly Cleaning Procedure. When you are done with
those instructions, return to this section.
1. Dispose of the spent OPC module in the trash.
2. Record the replacement of the OPC module and main charger unit in the maintenance &
service log.
4.8.3 Initialize the OPC Module's counter
Use this menu option to reset the counter so you can track the usage of the newly installed OPC
module.
1. Press the Menu button.
2. Using the Feed/► button, navigate to the Consumables menu and press Enter/▼.
3. Using the Feed/► button, navigate to the Initialize OPC. This resets the counter to zero.
64
Figure 4-13. Content
ule and wire cleaning brush. The main charger unit
. You should always remove the developer
s of OPC Module Kit