Printronix L7032 User Manual page 148

Disable. The printer will not advance media from the present TOF position to the next TOF
position upon receipt of an FF command.
The factory default is Enable.
Error Report
This item sets the error reporting capability of the printer for PGL forms as follows:
On. Full error checking repo ed. Any element that falls off the current page is reported as an
error.
Debug Mode. Puts the printer in debug mode whenever a form is defined in CREATE mode.
Each line of the CREATE form will be printed along with an error if one has occurred.
Off. There is no error checking whatsoever. Graphic elements such as alpha, line, barcodes,
etc. will be clipped if they are beyond the page boundaries.
The factory default is On.
Expanded Font
E xpanded font allows you to print characters in different sizes with specified parameters and to
select which font face
Scalable. Uses scalable fonts.
Block. Uses block fonts.
The factory default is Scalable.
Ext Execute Copy
Disable. D ynamic data, overlay data, etc. are not allowed if the optional Form Count
parameter (number of forms to print) is specified as part of the Execute com
setting is IGP-100 compatible.)
Enable. Dynamic data, overlay data, etc. are allowed within a form where the Form Count
paramet er is specified in the Execute command. In this case, the same form is printed for
whatever the Form Count is. Incremental data is n
the same. The overlay data is only printed with the
and each form is printed on a separate page.
The factory default is Disable.
Extra Bold Char.
The Extra Bold Char option specifies the thickness or stroke weight of the text fonts. The
allowable range is 0 to 512, in increments of 1. The default is 504.
Forms Handling
This submenu allows the user to handle the form in the following ways:
Disable (the default). No effect.
Auto Eject. Automatically ejects a page at the end of the job to spill out the last page.
Auto TOF. Automatically does a form feed (FF) at the end of each form to the next top of form.
144
rt
to use.
ot incremented since the printing page is
first form and not on subsequent forms,
mand. (This