Appendix Cvgl Setup Commands - Printronix L7032 User Manual

The following descriptions are listed in alphabetical order. See the
Manual for more information.
300 dpi Compatb l
This option allows you to print files designed for 300 dpi printers at full size on a 600dpi print
It determines whether or not 300 dpi images/barcodes need to be scaled to 600 dpi.
Disable. The images/barcodes are not scaled to 600 dpi – the printed image will be ½ the si
it printed on a 300 dpi printer.
Enable. The images/barcode
printed on a 300 dpi printer (the
T he factory default is Disable.
^ Dnn Dot Slew
Low Resolution. Sets the dot slew command dot values to be interpreted as 60 dpi P-S
dots.
High Resolution. Se
dots.
The factory default is Low Resolution.
Abs orb After ^PN
Disable. The paper motion line terminators that immediately follow the ^PN command are
sent to the printer and processed
Enable. The paper motion l
ignored.
The factory default is Disable.
Absor b After ^PY
Absorb Motion. The pape
command will be
Absorb All. The system ignores all the data following ^PY until a host generated terminator is
detected and ignored.
Disable. System terminato
in paper motion.
The factory default is Ab
App end Rotated
Disable. Logos and alphanumeric strings are treated as separate elements.
Enable. Appends logos to an alphanumeric string rotated in a clockwise, counterclockwise, or
inverted orientation.
The factory default is Disable.
Appendix C
VGL Setup Commands
s are scaled to 600 dpi – the image will print at the same size it
number of dots will be doubled in both directions).
ts the dot slew command dot values to be interpreted as print engine
.
ine terminators that immediately follow the ^PN command are
r motion line terminator immediately following the graphics ^PY
ignored.
rs following a graphics command are sent to the printer and result
sorb Motion.
VGL Programmer's Reference
er.
ze
eries
151