Printronix L7032 User Manual page 67

5. Lift out the spent fuser cleaning roller by its green handles. See Figure 4-12.
6 . Dispose of the spent fuser cleaning roller in the trash.
7. Hold the new fuser cleaning roller by its handles and lower it into the fuser unit.
8 . Close the top of the fuser unit.
9 . Turn the fuser latch counterclockwise slightly and hold it while you push the fuser drawer
back into the printer. Once the fuser drawer starts to go into the printer, you can release t
fuser latch. Push the fuser drawer into the printer until it latches.
10. Close the printer's front access door.
11. Put th e printer on line and make it ready.
12. Record the replacement o
Figure 4-12. Removing the Spent Fuser Cleaning Roller
f the fuser cleaning roller in the maintenance & service log.
he
63