Printronix L7032 User Manual page 6

Do not spill liquids of any kind on the printer. Do not place containers filled with liquid, such as
a cup or a vase of flowers, on top of the printer. Any liquid that enters the printer may cause an
electric shock or a fire.
Do not put any accessories or consumables on top of the printer.
Never attempt to lift the printer by yourself. At least two people are required to lift the printer.
To avoid injury, do not stick your hand into the printer's moving parts.
While the printer is operating, the fusing area is hot. When you turn off the printer, the fusing
area remains hot. Do not clear a paper jam in the fusing area, change the fuser cleaning roller, or
touch any parts in the fuser drawer until you have given the fusing area enough time to cool
down.
Do not touch the paper while printing. Touching the paper may cause a paper jam, and the paper
exiting the printer may be hot.
Do not open the front access door while the printer is printing. If you do, the paper will jam. To
clear the paper jam, you may have to realign the paper and resend the print job to the printer.
Always follow the instructions in this user's manual to clear a paper jam. If paper remains in the
paper path after you have attempted to clear a jam, the printer may jam again or print quality
may be degraded.
The developer unit is heavy. Always hold the developer unit with both hands. Do not try to
remove it from the printer with one hand.
Handle toner cartridges with care. Avoid breathing toner. Try not to get toner in your mouth or
eyes. Although toner is non-toxic, it may irritate your eyes and lungs, and it may get on your
clothes. If you get toner on your hands, wash them with cold water. Hot water makes the toner
more difficult to remove.
Store toner in a cool, dry place.
Do not put used toner, toner cartridges, or waste toner bottles in the fire. Dispose of these
consumables in the trash.
If you are going to ship the printer, repackage it using the original packing materials and
adhesive fasteners to avoid damage to the internal components.
If the developer contains mix or toner, be sure to also remove the developer unit from the printer
prior to shipping. If you must also ship a "charged" developer, be sure to double-bag the
developer with plastic bags and ship it in its own box, separate from the printer.
2