Printronix L7032 User Manual page 136

Message Text
Wrong Paper Size
Please load XX" x XX"
paper
Paper Jam
Jam Sensor
Paper Jam
Top Sensor
Paper Jam
Exit Sensor
Paper Jam
Paper Feed Sensor
Paper Jam
Drive System Error
Paper Jam
Jam code __
HV Error
PLEASE CALL
SERVICE
No OPC Unit
Please install
No Developer Unit
Please install
132
Explanation
A job has been processed
and is ready to print;
printer thinks its paper is
not the same size as paper
requested by job.
Note: First number shows
width of requested paper.
Second number shows
length of requested paper.
An unspecified jam in the
paper path has occurred.
The Top-of-Paper sensor
detected no paper motion.
Exit sensor did not detect
paper after paper motion
time out.
Paper tractor mechanism
has malfunctioned.
A cam error occurred
during paper motion.
Excessive current draw to
main charger
No OPC unit was detected.
No Developer unit was
detected.
Resolution
If size of paper loaded in
printer does not match size of
paper requested by job,
change paper and press Paper
Loaded button.
If size of paper loaded in
printer matches size of paper
requested by job, press
Ready/Stop button.
If you want to use paper
loaded in printer even though
it does not match size of paper
requested by job, press Ready
Stop button.
Check the paper path and
remove any paper jams.
Check the paper input area of
the printer and remove the
paper jam.
Check the paper exit area of
the printer and remove the
paper jam.
Call a service technician.
Turn the printer off, check the
paper path and clear any
jams, and make sure the
printer door is completely
closed. Power the printer on.
If this does not clear the error,
call a service technician.
Call a service technician.
Call a service technician.
Install an OPC unit.
Install a Developer unit.