3. Close the printer's front access door.
4. Clean the area around the printer.
5. If you are replacing the OPC module, return to Section 4.8.2 Clean the Printer and Replace
the Spent OPC Module.
If you are replacing the developer unit, return to Section 4.10.3 Clean the Printer and Replace
the Spent Developer Unit.
If you are performing the monthly cleaning procedure, continue with the steps below.
6. Plug in the printer's power cord.
7. Use the on/off switch to turn the printer on.
8. Put the print on-line and make it ready.
9. In the maintenance & service log, record the date, the total number of pages that the printer
has printed, and "monthly cleaning."
Note:
For more information, see Section 4.6 Using the Maintenance & Service Log.
102
Figure 5-25. Closing the Latch on the Latch Bar