Printronix L7032 User Manual page 86

5.5.2 Clean the Transfer Charger Unit
1 . Grasp the transfer charger unit by its black handle and pull it straight out of the printer. See
Figure 5-4.
2. Hold the transfer charger unit ove
3. Use the soft brush in the cleaning kit
sides of the unit.
4 . Turn the unit upside down and brush toner off the ends and sides of the unit.
5. Put the unit on a flat surface.
82
Figure 5-4. Removing the Transfer Charger Unit
r a trash container or a sheet of paper or plastic.
to brush black toner powder off the metal ends and