Printronix L7032 User Manual page 152

Trailing Edge
4 inche s
The top edge of
FEED
the image is
parallel to the
trailing edge of the
media.
Leading Edge
Inv. Landscape. Inverse Landscape refers to horizontal orientation, where the width of a page
is greater than its height. T
edge of the image is the trailing edge of the media). The factory default is Portrait. The
following illustration is an example, with the operator viewing the front of the printer.
Inverse Landsc ape orientation applies to PGL and VGL emulations.
4 inches
FEED
Leading Edge
Rep eat Form Opt
Ena ble (the default). Sp
increased printer throughput. This
unrelated to one another and should be disabled under those circumstances.
Disable. Shou ld be selected when subsequent forms are unrelated to one another.
Scalable Size
This option determines whether scalable characters are sized based on normal scaling or based
on the size of bloc k characters. If the option Block is set, then the scalable character are made to
be the same size as block characters in the old IGP-X00 printers.
The options are Normal (the factory default) and Block.
Sel ect Char
Ins tructs the IGP which decimal charac
The range is 0-255, and the fac
Select CPI
This item selects the characters per inch (CPI) value.
The op tions are 10.0, 12.0, 13.0, 15.0, 17.0, and 20.0 CPI.
The factory default is 10.0 CPI.
148
6 inches
he top edge of the image is the right edge of the media (the left
6 inches
eeds up the processing of repeated forms for PGL, thereby resulting in
option provides no speed benefit for forms that are
ter (0-255) to ignore from the host.
tory default is 0.