Printronix L7032 User Manual page 142

Operating
Env ironment • 50-90.5º F (10-32.5º C)
• 2
Dim ensions: W 24 inches (609 mm)
H 17.5 inches (44
D 24 inches (609 mm)
Weight 134 lb. (60.78 kg) with consumables installed
User-Serviceable Items*
Toner Kit
• Two toner cartridges each with
• Two toner waste bottles each
• One fuser cleaning roller wit
OPC Module Kit
• One OPC module with 400,000 page capacity
• One main charger unit with 30
• One wire cleaning brush
Transfer Charger Kit
• One transfer charger unit with 400,000 page capacity
Developer Kit
• One developer unit with 800,000 page capacity
Developer Mix Kit
• One bag of developer mix with 800,000 page capacity
• One ozone filter with 800,000 page capacity
• One cleaning kit
• Two plastic sheets
Fuser Kit
MICR (Magnetic Ink Character Recognition) Toner Kit
MICR (Magnetic Ink Character Recognition) Developer Kit
MICR (Magnetic Ink Character Recognition) Developer Mix Kit
* Based on 20 lb. (75 gsm) bond fanfold paper (8.5 inch x 11 inch landscape) –
other media may change these estimates.
Certifications CISPR-22 Class B*
EN50082-1:1994 compliant*
FDA/CDRH21CFR compliant*
IEC 825 compliant
CSA 950/NRTL-C (recognized component) (US 1950)*
EN60950 (TUV) (recognized component)*
138
0-80% RH
5 mm)
One fuser unit with 800,000 page capacity
One exit roller assembly with 600,000 page capacity
Two MICR toner cartridges, each with 32,000 page capacity at 4% density
(black)
Two toner waste bottles, each with 32,000 page capacity
One fuser cleaning roller with 64,000 page capacity
One developer unit with 800,000 page capacity
One bag of MICR developer mix with 600,000 page capacity
One ozone filter with 800,000 page capacity
One cleaning kit
Two plastic sheets
32,000 page capacity at 4% density (black)
with 32,000 page capacity
h 64,000 page capacity
0,000 page capacity