Printronix L7032 User Manual page 135

6.4.2 Output Device Full Messages
Message Text
Paper Tray Full
6.4.3 Warning Messages (Informational – doe
Message Text
Toner Low
Engine EEPROM is
ne r end-of-life a
Re f urbish drive
sy tem soon s
6.4.4 Printer Error Messag
Message Text
Dev. Initializing
XX% complete
Door Open
Please close the door
Out of Paper
Please load XX" x XX"
paper.
Explanation
Optional full power paper
stacker's paper tray is full.
Explanation
Toner is low after toner
mixing.
The EEPROM has a
limited number of
read/write cycles.
The drive system is
approaching the tim e
when new parts are
required to maintain print
quality.
es (Printing has stopped
Explanation
Developer is initializing.
Front access door is open.
The printer has no paper.
Resolution
Empty paper from stack
paper tray.
s no t stop printing)
Reso lution
Add toner at your earliest
convenience. Note that
printing will stop if toner runs
out.
The EEPROM needs to be
replaced before it fails.
Call a service technician for
drive system refurbishment
requirements.
– requires operator action)
Resolution
Wait until printer has
initialized developer and
Ready message appears. The
printer will ask the user to
load paper when this process
is complete.
Close front access door.
If door will not close:
•
Check wire cleaning tool.
Make sure its tab fits
through slot on frame.
•
Check main charger unit.
If it is not installed, install
it.
Load the size paper called for
by the LCD display. Press the
green Paper Loaded button.
er's
131