Environment; Printer Cleaning And Maintenance - Printronix L7032 User Manual

The toner kit contains:
•
Two toner cartridges (32,000 each)
•
Two waste toner bottles (32,000 each)
•
Fuser cleaning roller (64,000)
The OPC (Organic Phot
•
OPC module
•
Main charger unit
•
Wire cleaning brush
T he transfer charger kit
•
Transfer charger unit
The developer consists of two kits and includes:
•
Developer unit
•
Developer mix kit with a bag of developer mix, an ozone filter, a cleaning kit, and two plast
sheets.
The fuser kit contains:
•
Fuser unit
•
Exit rollers
See Chapter 3 for information about replacing consum
1.5.2 Disposing of Spent Consumables
A ll the consumables used in the printer are safe to handle. None of them are toxic. They do not
c ontain any substances that damage the environment. You can safely dispose of the consumables
in the trash.

1.6 Environment

An office environment with relatively low humidity and moderate temperatures is the best
environment for your printer. High humidity and high or low temperatures will shorten the life of
both the printer and its consumables and can impact print quality.

1.7 Printer Cleaning and Maintenance

To prevent the fuser from getting dirty, you should never power down the printer while it is
printing. If it is necessary to power down the printer in the middle of a job, place the printer
Offline first; then wait for printing to stop. Once the printer has completely stopped, turn the
power switch off.
You should clean and maintain your printer on a regular basis to ensure high-quality print
images, trouble-free service, and a long printer lifespan.
If you do not clean and maintain your printer, you may have degraded print images, paper jams,
frequent service calls, and a shorter printer lifespan.
For information about cleaning and maintaining your printer, see Chapter 5.
14
o-Conductor) module kit
contains:
contains:
ables.
ic