Printronix L7032 User Manual page 131

6 .2.22 Out-of-Position Image
1. Make sure that all consumables are installed in the printer.
2. Make sure that all consumables are within their expected lifespan by checking the
informatio n in the
longer than its expect
Consu mables.
3 . Clean the printer. Follow the instructions in 5.5 Weekly Cleaning Procedure and 5.6 Mont
Cleaning Procedure.
4. Check to make sure the paper is positioned directly under the paper tractors on the input
side of the printer.
If the paper is off to o
5. Make sure t hat the p
moderately tight between them.
If the p aper is not eve
If the tractors are holding the paper too tightly or too loosely, make the necessary adjustment.
Follow the in structio s in Section
6. Reload the paper an restart the print job.
7. If the paper is loade correctly and the problem
maintenance & service log. Replace any consumable that has been in use
ed lifespan. Follow the instructions in Chapter 4, Replacing
ne side, center it between the two paper tractors.
aper is placed evenly on the p
n on the tractors, reload
n 3.4 Loading Pap
d
d
aper tractors and that the paper is held
it ev enly.
er.
co ntinues, call a service
hly
technician.
127