Printronix L7032 User Manual page 150

Left Margin
Set in inches. Zero is defined as the far left edge of the page, and numbering increments from
to right.
The range is 0.0 – 6.0 inches in 1/10" increments. The factory default is 0.
Ma x Font Buffer
The maximum am ount of DRAM allocated to store the global font information of any resident and
downloaded scalab le font (e.g. Intellifont, TrueType). Each font contains its own global font
information that is required for all character generation from that font. Some fonts may req
more font buffer memory than others to
cau ses characters to be missing on the page and prints blank. If a font needs more memory fo
cha racter generation, increase the Max Font Buffer value to allow the printer to print the missing
cha racter.
The range is from 100 to 7200 Kbytes, and the factory default is 400 Kbytes.
Ma x Cache Memory
T he Maximum Cache Memory option specifies the size of the memory block that can be allocated
to the font cache . The font cache stores bitmaps that are created on demand from the font
outlines stored in Flash memory. The cache allows the printer to print scalable fonts at optimum
speed. To calculate the memory required, use this equation:
Hor izontal resolution x vertical resolution x character height (inc
# o f characters to be cached / 8
The allowable range is 50 KBytes to 3600 KBytes, in 50 KByte increments. The default value for
this parameter is 1 800 KBytes.
Maximum Cached Char
The Maximum Cached Characters option specifies the size of the largest char
stored in the font cache. To c
Horizontal resolution x vertical resolution x character height (inches) x character width (inches)
For example, if an application requires the use of a character that is 1 inch high by 1 inch wide
calculate the Max imum Cached Characters value as follows:
300 x 300 x 1 x 1 = 11,250
8
The refore, select a value th
KBy tes.
The a llowable range is 1 KBytes to 20 KBytes, in 1-KByte increments. The de
parameter is 8 KB ytes.
146
generate characters. Insufficient font buffer memory
alculate the memory requirement, use this equation:
8
at is equal to or greater than 11,250. The closest available value is 12
hes) x character width (inches) x
acter that can be
fault value for this
left
uire
r
,