Printronix L7032 User Manual page 61

4.7.3 Install the New Toner Cartridge
1. Hold the new toner cartridge by both ends. The two pins should point upward. The plastic
sealing strip will be near the top of the cartridge. See Figure 4-3.
2. Shake the toner cartridge back and forth along its length to distribute the toner evenly across
the cartridge. See Figure 4-3.
3. Match the two pins on the toner cartridge to the pin channel on the developer unit. See Figure
4-4.
4. Slowly p us h the new toner cartridge into the developer unit.
5. When the toner cartridge is all the way into the developer unit, turn the cartridge
counterclockwise slightly so that the pins on the cartridge are engaged with the developer
and hold the cartridge in
Figure 4-3. Holding the New Toner Cartridge
Figure 4-4. Preparing to Install the New Toner Cartridge
place. The plastic sealing strip should be facing up.
unit
57