Printronix L7032 User Manual page 156

Auto FF at ^PN
Wh en enabled, an FF will be generated automatically to slew to the end of form when the ^P
com mand is encountered and when the current vertical position is not at the top-of-form.
The options are Disable (the factory default) and Enable.
Autoeject
Determines paper h andling upon exiting the VGL Repeated Form and Dynamic Form commands.
Disable. Holds the print posit
Enable. Issues a form feed after the last form is printed so all pages will be physically printed.
The factory default is Disable.
Barcode Errors
Enable. An e rror message will print when invalid bar code data is encountered.
Disable. V GL will not print an error for illegal bar code data; the bar code will be skipped.
When Barcode Errors is disabled, the VGL emulation will try to make the best use of invalid
data by either truncating extra digits or adding ze
minimum data length requirements for some bar c
The factory default is Enable.
Barcode var.
This command o nly applies for IBARC barcode command format.
Low Resolution. Sets barcode ratio dot values to be interpreted as line matrix printer dot
(60 x72).
High Resolution. Sets barc
300 or 203 x 203).
The factory defau lt is Low Resolution.
Bol d Chars.
The Bold chars option specifies t
range is 0 to 512, in increments
Btm Margin Ctl
This me nu determines whether or not the page's bottom margin is se
calc ulated based on the setting of the menus "Text Length" and "S
length.
Disable. The bottom margin is not set.
Enable. T he bottom margin is set.
The factory default is Disable.
C39 Compatbl.
This menu makes the old method of decoding C39 alternative character set compatible with the
new.
Enable. Matches the old method of decoding.
Disable. Uses the current way of decoding.
152
ion at the bottom of the form.
ode ratio dot values to be interpreted as print engine dots (300 x
he thickness or stroke weight of the text fonts. The allowable
of 1. The default is 448.
ros to the end of bar code data to meet
odes. Not all errors will be corrected.
t. The bottom margin is
elect LPI" and the current page
N
s