Replacing The Fuser Unit And Exit Rollers - Printronix L7032 User Manual

4.10.6 Install a New Toner Cartridge
Install a new toner cartridge. Follow the instructions in Section 4.7 Adding Toner
n ew toner cartridge, the new waste toner bottle, and (if you are installing the first toner cartridge
in the t oner kit) the new fuser cleaning roller.
4

.11 Replacing the Fuser Unit and Exit Rollers

Foll ow these instructions to replace the fuser unit and the exit rollers.
4.11.1 Open the Fuser Kit Box
1. O pen the fuser kit box. See Figure 4-20.
2. Make sure the box contains a fuser unit and exit rollers: six soft black rollers on a metal
shaft.
4 .11.2 Remove the Spen
1. Make sure all your print jobs are finished. Stop the printer and take it off-line.
2 . Use th e on /off switch on the paper-input side of the printer to turn the printer off. Remove
the pape r f rom the printer.
3. Open the printer's front access door.
4. Turn the fuser latch counterclockwise slightly until it releases the fuser drawer on the left
side of the printer.
5. Make sure that the fuser drawer is all the way out of the printer. The drawer should be
latched open.
Caution: If the printer has been in operation, the fuser unit may be very hot.
70
Figure 4-20. Contents of Fuser Kit
t Fuser Unit and Exit Rollers
to install the