Monthly Cleaning Procedure - Printronix L7032 User Manual

5.6 Monthly Cleaning Procedure

Foll ow these instructions eve
Recommendation: A toner vacuum cleaner will help you clean the printer fast and efficiently.
Warning: Turn the printer off and unplug the power cord before you clean the printer.
If a wet cleaning cloth comes in contact with a high voltage component, you
can receive a dangerous electric shock.
5.6.1 Prepare to Remove the Consumables
1. Prepare a towel or a sheet of plastic or paper to put the OPC module, developer unit, fuser
unit, transfer charger unit, and waste toner bottle on. The consumables will have black toner
dust on them. The towel or sheet will catch the dust.
2. Get an opaque covering ready to cover the OPC module when you remove it from the printer.
Use any convenient opaque covering, such as a cardboard box, a large sheet of paper, or a
large cloth.
Note: If you are replacing the OPC module, you do not need to cover it. You will dispose
of it at the end of the procedure.
3. Make sure all your print jobs are finished. Then stop the printer and take it off-line.
Caution: Do not turn the printer off, unplug the power cord, or open the front access door
while the printer is printing. If you do, the paper will jam, and you will lose the
data that has b
4. Use the on/off switch on the paper-input side of the printer to turn the printer off.
5 . Remove the paper from the printer.
6. Unplug the printer's power cord.
7. Open the printer's front access door.
8. Rotate the green latch clockwise to release the latch bar. See Figure 5-6.
84
ry month or whenever the printer prints 150,000 11-inch pages.
een sent to the printer.