Printronix L7032 User Manual page 85

12. Position the wire cleaning brush as shown in Figure 5-3, place it in the main charger unit,
and run it back and forth once to clean the corona wires.
Caution: The two wires are fragile. Be careful not to damage them. Never clean the wires
with a cloth or cotton swab. A stray fiber left on a wire may damage the printer.
Note: The wire cleaning brush will fit into the main charger unit only one way. If you are
having a problem, make sure that you have the wire cleaning brush positioned
exactly as shown in Figure 5-3.
13. When you are done, p
place.
Cauti on: The grid on the bottom of the main charger unit is fragile. Be careful not to
damage it.
Figure 5-3. Cleaning the Wires in the Main Charger Unit
ush the main charger unit into the OPC module until it slides into
81