Printronix L7032 User Manual page 55

The table below shows the recommended intervals for replacing the printer's other consumables.
Consumable
OPC Module Kit
Transfer Charger Unit
Developer Kit
Developer Mix Kit
Toner Kit (Two Bottles)
Fuser Kit, 230V
Fuser Kit, 115V
MICR* Developer Kit
MICR Developer Mix Kit
MICR Toner Kit (Two
Bottles)
* Magnetic Ink Character Recognition
Consumables replacement intervals will vary based on your individual printer usage. If your
usage differs from the typical printer usage described in Section 4.3.2 Assumptions about the
Recommended Replacement Intervals, you may need to replace consumables at more or less
frequent intervals.
These recommended intervals are typical life expectancies for each consumable. An individual
consumable may produce slightly more or fewer printed pages than a typical consumable.
Important: Replace consumables promptly. If you wait too long to replace a worn-out
consumable, printer performance may degrade and lower the lifespan of the
printer and the other consumables.
4.3.2 Assumptions about the Recommended Replacement Intervals
The recommended replacement intervals are based on the following assumptions:
•
Toner coverage is 4 percent (black) on each 8 ½ x 11-inch (93.5 square inch) page
If you print pages with high toner coverage, you will have to replace the toner cartridge more
often. Higher toner coverage may contribute to wear on all the other consumables. If you print
pages with high toner coverage, you may have to replace both your toner cartridge and fuser
unit more often.
•
Paper is high quality, smooth (well-calendared) 20 lb. (75 gsm) weight
Heavier paper and non-standard media reduce the lifespan of the fuser unit and the OPC
module.
•
Continuous printing or print jobs of at least 1,000 pages
All laser printers must make several additional rotations between print jobs. These rotations
increase the wear on the consumables. If you print small jobs regularly, it is recommended
that you put them in a print queue and send them to the printer at the same time to limit
increased wear.
•
Best operating environment, which has a relative humidity of 40-65%
Replacement Interval
in 8 ½ x 11 Inch
Landscaped Pages
400,000
400,000
800,000
800,000
32,000 per bottle
800,000
800,000
800,000
800,000
32,000 per bottle
Part Number
251748-001
251745-001
251746-001
251747-001
251749-001
251743-001
251744-001
251803-001
251804-001
251742-001
51