Printronix L7032 User Manual page 22

Display Scroll
Form ◄►
Configuration
Print Engine ◄►
Configuration
18
Enter Display
▼ Width
Length
Thickness
Print Policy
▼ Image X
Position
Image Y
Position
Fuser
Temperature
Scroll Enter Set
Parameter
Info
◄► ▼ Use ◄► to
select
column, ▲▼
to select
number.
Press S/▼ to
save, S/▲ to
exit.
◄► ▼ Use ◄► to
select
column, ▲▼
to select
number.
Press S/▼ to
save, S/▲ to
exit.
◄► ▼ Press ◄► to
select. Press
S/▼ to save,
▲ to exit.
◄► ▼ Press ◄► to
select. Press
S/▼ to save,
▲ to exit.
◄► ▼ Use ◄► to
select
column, ▲▼
to select
number.
Press S/▼ to
save, S/▲ to
exit.
◄► ▼ Use ◄► to
select
column, ▲▼
to select
number.
Press S/▼ to
save, S/▲ to
exit.
◄► ▼ Use ◄► to
select
temperature.
Press S/▼ to
save, ▲ to
exit.
Comment
Sets form
width from
3.50 to 13.88
inches.
Sets form
length from 3
to 33 inches.
Sets form
thickness to
either normal
or
label/cardstock
Sets printer to
either display
form size
difference error
or ignore it
Adjusts
starting print
position
horizontally
-100 to +100
pixels
Adjusts
starting print
position
vertically
-100 to +100
pixels
Sets fusing
temperature at
160, 170, 180,
190, or 200
degrees C