Printronix L7032 User Manual page 51

6. Lock the tractors in place by rotating the locks toward you. Figure 3-2 shows paper loaded in
the printer.
7. If you are not using an optional auto-fed power paper stacker, go to the next step.
If you are using an optional auto-fed power paper stacker (see list of models in Appendix A
Specifications), set the paper fold switch to match the direction of the paper's first fold as
shown on the label next to the switch.
If the first fold makes a valley, press down on the lower half of the switch.
If the first fold makes a mountain, press down on the upper half of the switch.
Caution: If you are using an optional auto-fed power paper stacker and you do not set the
paper fold switch correctly, the paper output from the printer may go into the
power paper stacker with the paper folding in the wrong direction at the
perforations. When this happens, the paper is likely to jam in the power paper
stacker or printer.
8. Press the green Paper Loaded button on the paper-input side of the printer. See Figure 3-2.
The printer is now ready to print.
Figure 3-2. Paper Loaded in the Printer
47