Printronix L7032 User Manual page 127

6.2.18 Offset Image ("Ghost" of Image)
1. Make sure that all consumables are installed in the printer.
2. Make sure that all consumables are within their expected lifespan by checking the
information in the maintenance & service log. Replace any consumable that has been in use
longer than its expected lifespan. Follow the instructions in Chapter 4, Replacing
Consumables.
3. Clean the printer. Follow the instructions in 5.5 Weekly Cleaning Procedure and 5.6 Monthly
Cleaning Procedure.
4. Replace the OPC module by following the instructions in Section 4.8 Replacing the OPC
Module.
Note: Because the OPC module may not b
module with an opaque covering (such as a cardboard box, a large sheet of paper,
or a large cloth) when you remove it from the printer. The covering protects the
OPC mo
If replacing the OPC module does not fix the problem, reinstall the old OPC module.
5. R eplace the fuser unit by following the instructions in 4.11 Replacing the Fuser Unit and Exit
Rollers.
If replacing the fuser unit does not fix the problem, reinstall the old fuser unit in the print
6 . Call a service technician.
dule from damage by exposure to light.
e the cause of the problem, cover the OPC
er.
123