Appendix B Pgl Setup Commands - Printronix L7032 User Manual

The following descriptions are listed in alphabetical order. See the PGL Programmer's Reference
Ma nual for more information.
300 dpi Compatbl
This option allows you to print files designed for 300 dpi printers at full size on a 600dpi printer.
It determines whether or not 300 dpi
Disable. The images/barcodes are not scaled to 600 dpi – the printed image will be ½ the size
it printed on a 300 dpi printer.
Enable. The images/barcodes are scaled to 600 dpi – the image will print at the same size it
printed on a 300 dpi printer (the number of dots will be doubled in both directions).
The factory default is Disable.
AI 0 0 Spaces
Thi s option is designated for EAN/UCC-128 barcodes whose application identifier (AI) is
Disable. The printable data field is printed with the AI enclosed in parentheses. This is
standard EAN/UCC-128 format.
Enable. The printable data field is printed with the UCC fields separated by spaces. This
option is IGP-X00 c
The factory default is Disable.
Auto Upperca se
This parameter enables the printer to print text in all uppercase when using the ALPHA
comman d.
Disable. The printer will print text in upper and lo
Enable. The printer will print text in uppercase only.
The factory default is Disable.
Autowrap
Thi s parameter determines if text will wrap to the next line when t
ma rgin.
Disable. Truncates the text
Enable. Automatically inserts a CR + LF after a full print line.
The factory default is
Bold Chars.
The Bold chars option specifies the thickness or stroke we
range is 0 to 512, in increments of 1. The default is 448.
Appendix B
PGL Setup Commands
images/barcodes need to be scaled to 600 dpi.
ompatible.
beyond the right margin until a CR or CR + LF is received.
Disable.
wercase.
he line of text exceeds the right
ight of the text fonts. The allowable
00.
the
141