Printronix L7032 User Manual page 165

Standard Chars.
The Standard Chars option specifies the thickness or stroke weight of the text
fonts. The allowable range is 0 to 512, in increments of 1. The default is 340.
(This parameter has no effect in the L7032 printer.)
Standard Sets
This item allows you to select various character sets available f
The options are Standard, Arabic, Cyrillic, European, Greek, H
The factory default is Standard Sets.
Tall Characters
Increases the point height of resident Intellifont characters.
Enable. Increases the point h
Disable. Standard resident font character point height is maintained.
The factory default is Disa
(This parameter has no effect in the L7032 printer.)
Text Length
Tex t Length is the printable length on th
The rang e is 1-255, and the factory default is 66.
Tru e Vert 1/1 0
Disable (th e default). When disabled and in High Resolution, a vertical line's length in one
inch and 1/10 inch increments is interpreted as 70/72 inch and 7/72 inch respectively.
Enable. When enabled, a vertical line's length is interpreted exactly, which is 72/72 in
one inch increments.
Truncate Alpha
Enable (the default). Prevents the printing of Error 48 (Element Off Page Error) if
alphanumeric data, including spaces, extends beyond the right side of the form.
Disable.
UPC Descenders
Enable (the default). UPC/EAN bar codes are printed with descenders, even if there is no human
readable data.
Dis able. UPC/EAN bar codes are printed without d
eight of resident Intellifont characters approximately 10%.
ble.
e page below the top margin.
rom the "Character Group" item.
ebrew, and Turkish Sets.
escenders if there is no human readable data.
ch in
161