Printronix L7032 User Manual page 159

Err or Msgs
Enable. Command syntax is checked and error messages printed when command para
are incorrect.
Disable. Error checking and error messages are suppressed.
The factory default is Disable.
Ex panded Font
Expanded font all ows you to print characters in different sizes with specified parameters and
allows you to select block or non-block font face.
Scalable. Uses Gothic font as default. Other font face
command.
Block. Uses Block font.
The factory default is Scalable.
Extra Bold Ch ar.
The Extra Bold Char option specifies the thickness or stroke weight of the text fonts. The
allo wable range is 0 to 512, in increments of 1. The default is 504.
Host Form Length
Sets the printer p age size.
Enable. Sets the printer label size equal to Label Lengt
(For more information, refer to the IGP/VGL Programmer's Refe
Disable. Sets the printer labe
PRINTER CONT ROL menu.
The factory default is Disable.
Ign ore Ch#1
Spe cifies character 1 for the character filtering option. Valid decimal values are from 0 thro
255 .
The factory default is 0
Ignore Ch#2
Spe cifies character 2 for the character filtering option. Valid decimal values are from 0 through
255 .
The factory default is 0.
Ignore Chars
Disable. Cha racter filtering is not enabled.
Char 1. Character 1 will be filtered. Select the option "Ignore ch#1" to specify character 1.
Char 2. Character 2 will be filtered. Select the option "Ignore ch#2" to specify character 2.
Char 1&2. Characters 1 & 2 will
ch#2" to specify values for the
The factory default is Disable.
l size equal to the Label Length set in the front panel under the
.
be filtered. Select the options "Ignore ch#1" and "Ignore
s characters. e
s can be selected by using the IFONT
h from the host form length command.
rence Manual.)
meters
ugh
155