6. Unplug the two electrical connectors attached to the fuser drawer as follows:
•
Unplug the smaller connector on top by pressing the clip on the top of the connector and
pulling it firmly away from the printer.
•
Unplug the larger connector by pressing the two clips, one on each side, and pulling the
connector firmly away from the printer.
See Figure 4-21.
7. Lift up the back-up exit rollers (the row of six white rollers) using the black handle on the side
of the rollers nearest the front of the printer. See Figure 4-22.
Figure 4-21. Unplugging the Electrical Connectors
71