Adding Toner - Printronix L7032 User Manual

4.7 Adding Toner

Recommendation: Always add toner at the first convenient point after you see the Add Toner
message on the operator panel's status display. If you wait too long, the Toner Empty message
will appear, and the printer will stop printing until you change the toner cartridge.
When you add toner, replace the toner cartridge and the waste toner bottle. Every other time that
you replace the toner cartridge, replace the fuser cleaning roller.
Follow these instructions to replace the toner cartridge, the waste toner bottle, and the fuser
cleaning roller.
4.7.1 Open the Toner Kit Box
1. Open the toner kit box. See Figure 4-1.
2. Make sure the box contains two toner cartridges, two waste toner bottles, and a fuser
cleaning roller.
4.7.2 Remove the Spent Toner Cartridge
1. Prepare a place to put the spent toner cartridge. For example, you might put it in a small
plastic trash bag or on sheets of paper. The spent toner cartridge may drop black toner dust.
Important: Black toner dust may be released when you replace the toner cartridge. Be
careful not to get toner on your clothing. If you get toner dust on your hands,
wipe it off with a dry cloth or wash it off with cold water. Do not use hot water;
it will make the toner more difficult to remove.
2. Make sure all your print jobs are finished. Then stop the printer and take it off-line.
Caution: Do not open the front access door while the printer is printing. If you do, the paper
will jam.
3. Open the printer's front access door.
Figure 4-1. Contents of Toner Kit
55