Printronix L7032 User Manual page 170

14. Identify which emulation set on the CD you want to download into the printer and note the
filename that corresponds to that emulation. The filename is a six digit number plus .exe. For
example: 123456.exe. This is the emulation file you will download into the printer.
15. Copy the emulation set file to the download directory you created in step 6.
16. Using the emulation set file name you selected in step 14, download the emulation set file to
the printer by entering the following command:
xxxxxx.exe –mj –n yyy.yyy.yyy.yyy <Enter> where xxxxxx is the emulation set file name and
yyy.yyy.yyy.yyy is the IP address of the printer.
Do not interrupt the downloading process once it has started. Interrupting a download will
leave the flash memory on the controller PCBA incompletely loaded, and the printer may
not boot up.
While the file is copied into memory, the printer LCD informs you of the download process
and status.
17. When the printer goes "ONLINE", the download is complete.
18. Remove the CD from the host computer and store it with the printer.
19. If required, remove the Ethernet data cable from the printer.
20. Using the configuration printout(s) you made in step 1, restore the printer configurations.
Downloading Software Through The Printer Port of
a Unix, Linux, or Macintosh based system
The firmware file xxxxxx.exe is a ZIP archive containing a PJL (xxxxxx.pjl) file. If you know how to
print a PJL file to the L7032, you can 'unzip' the release file to get the PJL file, then just print the
xxxxxx.pjl file to the printer to upgrade the firmware.
Do not interrupt the downloading process once it has started. Interrupting a download will
leave the flash memory on the controller PCBA incompletely loaded, and the printer may
not boot up.
While the file is copied into memory, the printer LCD informs you of the download process
and status.
166