Printronix L7032 User Manual page 87

6. Position the wire cleaning brush as shown in Figure 5-5, place it in the transfer charger unit,
and run it back and forth once to clean the corona wires.
Caution: The two wires are fragile. Be careful not to damage them. Never clean the wires
with a cloth or cotton swab. A stray fiber left on a wire may damage the printer.
Figure 5-5. Cleaning the Wires in the Transfer Charger Unit
7. Turn the transfer charger unit right-side up.
8. Push the tr ansfer charger uni
9. Place the wire cleaning brush in its storage ar
unit. See Figure 5-2.
Note: If you do not position the wire cleaning brush correctly, you will not be able to
close the printer's front access door.
10. Close the printer's front access door.
11. Use the on/off switch to turn the printer on.
12. Put the print on-line and make it ready.
t into the printer until it slides into place.
ea behind the metal tab below the developer
83