I Programming A Memory Channel - Icom IC-2200H Instruction Manual

5
MEMORY OPERATION

I Programming a memory channel

VFO settings, including the set mode contents such as sub-
audible tone frequency, etc., can be programmed into a mem-
ory channel.
q Set the desired frequency in VFO mode.
➥ Push [V/MHz
SCAN
➥ Set the frequency using [DIAL].
➥ Set other data (e.g. tone frequency, duplex information,
etc.) if required.
w Push [S.MW
MW
• "M" indicator and the memory channel number blink.
[EXAMPLE]: Programming 145.870 MHz into memory channel 20 (blank channel) via the front panel.
( )
SCAN
Push
V/ MHz
MUTE
NAR
MID
LOW
LOCK ANM DUP
S ET MONI LOW
Rotate
MUTE
NAR
MID
LOW
LOCK ANM
S ET MONI
25
] to select VFO mode.
] momentarily.
Rotate for setting frequency, etc.
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
T-SCAN PRIO SCAN LOCK
TONE M/CALL V/ MHz
DIGITAL PRIO AO BUSY
DUP T-SCAN PRIO SCAN
LOW TONE M/CALL V/ MHz
e Rotate [DIAL] to select the memory channel to be pro-
grammed.
• Memory channels not yet programmed are blank.
r Push [S.MW
• 3 beeps sound.
• Memory channel number automatically increases when contin-
uing to push [S.MW
✔CONVENIENT
Memory programming can be performed in versatile ways
e.g. memory channel to the same (or different) memory chan-
nel, memory channel to the call channel, etc.
DIGITAL PRIO AO BUSY
ANM DUP T-SCAN PRIO SCAN
S ET MONI LOW TONE M/CALL V/ MHz
S.MW MW
Push for 1 sec.
➠
and continue to push
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN PRIO
S ET MONI LOW TONE M/CALL
MW ] for 1 sec. to program.
MW ] after programming.
S.MW
MW
Push momentarily.
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN
S ET MONI LOW TONE
"
"
Beep
MUTE
"
Beep
NAR
MID
"
Beep
LOW
SCAN LOCK ANM DUP
"
V/ MHz S ET MONI LOW
PRIO SCAN
M/CALL V/ MHz
DIGITAL PRIO AO BUSY
T-SCAN PRIO SCAN
TONE M/CALL V/ MHz