I Using The Keypad; I Using The [Y]/[Z] Keys - Icom IC-2200H Instruction Manual

I Using the keypad

The frequency can be directly set via numeral keys on the mi-
crophone.
z Push [VFO/LOCK] to VFO mode, if necessary.
ENT
x Push [
C(T-OFF)] to activate the keypad for
ENT
C
digit input.
c Push 6 keys to input a frequency.
• When a digit is mistakenly input, push [
to clear the input, then repeat input from the 1st digit.
• Pushing [ A(MW)] clears input digits and retrieves
CLR
the frequency.
[EXAMPLE]: Setting frequency to 145.3625 MHz.
MUTE
NAR
Push
MID
LOW
MUTE
NAR
Push
MID
LOW
Push
MUTE
NAR
MID
LOW
MUTE
Push NAR
MID
LOW
C(T-OFF)]
ENT
DIGITAL PRIO AO BUSY
LOCK ANM DUP T-SCAN PRIO SCAN
S ET MONI LOW TONE M/CALL V/ MHz
DIGITAL PRIO AO BUSY
LOCK ANM DUP T-SCAN PRIO SCAN
S ET MONI LOW TONE M/CALL V/ MHz
DIGITAL PRIO AO BUSY
LOCK ANM DUP T-SCAN PRIO SCAN
S ET MONI LOW TONE M/CALL V/ MHz
DIGITAL PRIO AO BUSY
LOCK ANM DUP T-SCAN PRIO SCAN
S ET MONI LOW TONE M/CALL V/ MHz
SETTING A FREQUENCY

I Using the [Y]/[Z] keys

➥ Push [Y Y ] or [Z Z ] to select the desired frequency.
YZ • Pushing [Y Y ]/[Z Z ] for 1 sec. activates a scan. If scan
starts, push [Y Y ]/[Z Z ] again or push [
cancel it.
2
2
A(MW)] to
CLR
10