I Programming A Memory Channel - Icom IC-A24 Instruction Manual

IC-A24-Nocl.qxd 04.9.1 5:50 PM
4
MEMORY OPERATION
I Programming a memory
channel
The transceiver has 200 (20 CH. × 10 BANK) memory chan-
nels for storage of often-used frequencies.
q Push [CLR•
] to select the frequency mode, if neces-
DEL
sary.
w Select the desired frequency.
• Push , then push [ENT•
• Set the desired frequency or weather channel* using [DIAL] or
keypad.
e Push
, then push [MR•
into the selected memory channel.
• Memory BANK and memory channel number appears.
r Rotate [DIAL] to select the desired memory channel num-
ber.
• Push , then push [0• BANK
sired.
• Push [CLR• DEL ], [ENT• WX
the BANK selection mode.
• "M," BANK and memory numbers are blinks.
t Push [ENT•
] to program the information into the chan-
WX
nel and return to the frequency mode.
*Weather channel: U.S.A. version only.
13
Page 14
] to select a weather channel.*
WX
] to program the contents
MW
] to select the BANK number if de-
] or , then push [0• BANK ] to exit
• EXAMPLE: Programming WX-05* into memory BANK 3/
memory channel 9.
Push
or
Push
Push Push
Push
Push or
(or rotate [DIAL])
Push or
Push
(or rotate [DIAL])