I Digital Voice Mode Operation - Icom IC-2200H Instruction Manual

12
DIGITAL MODE OPERATION

I Digital voice mode operation

q Set the desired frequency in VFO mode. (pgs. 9, 10)
• Select output power, if desired. (p.15)
w Push [BANK
OPT
[V/MHz] several times to select the digital select mode.
• "DG" appears.
e Rotate [DIAL] to turn the digital mode ON.
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN
S ET MONI LOW TONE
r Push [BANK
OPT
• "MYC" appears.
t Rotate [DIAL] to select the desired your call sign channel,
if you have programmed several call signs.
z Set the desired frequency in VFO mode.
• Select output power, if desired. (p.15)
BANK/OPTION
x Push [BANK/OPTION] for 1 sec. then
push [BANK/OPTION] or [MR/CALL] to
select the digital select mode.
• "DG" appears.
c Push [Y Y ] to turn the digital mode ON.
v Push [BANK/OPTION] to select the your
call sign select mode.
• "MYC" appears.
b Push [Y Y ] or [Z Z ] to select the desired your
call sign channel, if you have programmed
several call signs.
61
] for 1 sec. then push [BANK
Appears
DIGITAL
MUTE
NAR
MID
LOW
PRIO SCAN LOCK ANM DUP T-SCAN
M/CALL V/ MHz S ET MONI LOW TONE
] to select the your call sign select mode.
D D When sending a CQ
y Select "CQ" as the call sign.
OPT ] or
- Push [BANK
mode.
• "YUC" appears.
- Rotate [DIAL] to select the desired channel then push
[SET] or [MONI].
- Push [S.MW
PRIO AO BUSY
PRIO SCAN
M/CALL V/ MHz
BANK/OPTION
OPT ] twice to select the call sign select
MW ] for 1 sec. to edit "CQCQCQ."
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN PRIO SCAN
S ET MONI LOW TONE M/CALL V/ MHz
n Select "CQ" as the call sign.
- Push [BANK/OPTION] twice to select the
call sign select mode.
• "YUC" appears.
- Push [Y Y ] or [Z Z ] to select the desired
channel then push [
[ C(T-OFF)].
ENT
- Push [FUNC] then [
sec. to edit "CQCQCQ."
B(D-OFF)] or
SET
A(MW)] for 1
CLR