E Memory Channel Programming - Icom IC-707 Instruction Manual

MEMORY CHANNELS 4
Hi Memory channel programming
Memory channel programming can be performed
either in VFO mode or MEMORY mode.
While in VFO mode
[Example] : Programming 7.088 MHz, LSB mode
into memory channel 12.
1) In VFO mode, select the desired frequency and
operating mode.
2) Push the [FUNC] switch, then rotate the main dial
to select a memory channel number.
e To contirm the memory channel contents, refer to
page at left.
Select frequency
and mode.
Push the [FUNC] switch to cancel "FUNC."
4) Push and hold the [MW] switch until the speaker
emits 3 beep tones.
e The displayed frequency and operating mode are
programmed into the memory channel.
Select a memory
channel number. FUNC OC)
To confirm the programmed contents, push the
[FUNC] switch, then push the [V/M] switch.
Program into a Push and MW g
memory channel. hold
While in MEMORY mode Programming 21.280 MHz, USB mode
into memory channel 18.
1) In MEMORY mode, push the [FUNC] switch,
then rotate the main dial to select a memory
channel.
3) Select the desired frequency and operating
mode in MEMORY mode.
4) Push and hold the [MW] switch until the speaker
emits 3 beep tones.
e The displayed frequency and operating mode are
Select frequenc:
programmed into the memory channel. q y
and mode.
s œ» 268 aa r Er er]
kad 1 C ic g DLL
Program into a Push and
memory channel. hold