I Microphone (Hm-133V) - Icom IC-2200H Instruction Manual

I Microphone (HM-133V*)
q
w
e
r
t
*A different microphone
may be supplied de-
pending on version.
q VFO/LOCK KEY [VFO/LOCK]
➥ Push to select VFO mode. (p. 9)
➥ Push for 1 sec. to switch the lock function ON and OFF.
(p. 12)
w PTT SWITCH
➥ Push and hold to transmit; release to receive.
➥ Switches between transmitting and receiving while the
one-touch PTT function is in use. (p. 16)
e UP/DOWN KEYS [Y]/[Z]
➥ Push either key to change operating frequency, mem-
ory channel, set mode setting, etc. (pgs. 10, 24)
!1
➥ Push either key for 1 sec. to start scanning. (p. 38)
!0
r ACTIVITY INDICATOR
o
➥ Lights red while any key, except [FUNC] and [DTMF-S],
i
is pushed, or while transmitting.
u
➥ Lights orange while the microphone keypad lock func-
y
tion is activated.
Mic element
➥ Lights green while the one-touch PTT function is in use.
t KEYPAD (pgs. 7, 8)
y FUNCTION INDICATOR
➥ Lights orange while [FUNC] is activated—indicates the
secondary function of keys can be accessed.
➥ Lights green when [DTMF-S] is activated—DTMF sig-
nals can be transmitted with the keypad.
u FUNCTION KEY [FUNC] (pgs. 7, 8)
i DTMF MEMORY SELECT KEY [DTMF-S] (p. 46)
o FUNCTION KEYS [F-1]/[F-2] (p. 84)
Program and re-call your desired transceiver conditions.
!0 BANK/OPTION KEY [BANK/OPTION]
➥ Push to selects memory bank condition during memory
mode. (p. 32)
➥ Push for 1 sec. to enter the DTMF or option set mode.
!1 MEMORY/CALL KEY [MR/CALL]
➥ Push to select memory mode. (p. 24)
➥ Push for 1 sec. to select call channel. (p. 35)
PANEL DESCRIPTION
1
1
6