Icom IC-2200H Instruction Manual page 94

13
OTHER FUNCTIONS
D D Auto power OFF
The transceiver can be set to automatically turn OFF after a
specified period with a beep when no key operations are per-
formed.
30 min., 1 hour, 2 hours and OFF (default) can be specified.
The specified period is retained even when the transceiver is
turned OFF by the auto power OFF function. To cancel the
function, select "OF" in this set mode.
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN
S ET MONI LOW TONE
D D Repeater lockout
Selects lockout type from repeater, busy and OFF.
• OF : No lockout is activated (default)
• RP : The repeater lockout is turned ON
• BU : The busy lockout is turned ON
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN
S ET MONI LOW TONE
Busy lock-out setting
81
DIGITAL PRIO
MUTE
NAR
MID
LOW
PRIO SCAN LOCK ANM DUP T-SCAN
M/CALL V/ MHz S ET MONI LOW TONE
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
PRIO SCAN LOCK ANM DUP T-SCAN
M/CALL V/ MHz S ET MONI LOW TONE
Repeater lock-out setting
D D Squelch delay
Selects squelch delay from short and long to prevent re-
peated opening and closing of the squelch during reception
of the same signal.
• S : Short squelch delay (default)
• L : Long squelch delay
MUTE
NAR
MID
LOW
LOCK ANM DUP
S ET MONI LOW
AO BUSY
Short squelch delay setting
PRIO SCAN
M/CALL V/ MHz
D D S-meter squelch
Selects S-meter squelch threshold level from OFF and
S1–S7.
This setting allows you to set a minimum signal level needs to
open the squelch.
MUTE
NAR
MID
LOW
LOCK ANM DUP
S ET MONI LOW
S-meter squelch OFF (default)
PRIO SCAN
M/CALL V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
T-SCAN PRIO SCAN LOCK ANM DUP
TONE M/CALL V/ MHz S ET MONI LOW
Long squelch delay setting
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
T-SCAN PRIO SCAN LOCK ANM DUP
TONE M/CALL V/ MHz S ET MONI LOW
S2 level (2 indicator level)
DIGITAL PRIO AO BUSY
T-SCAN PRIO SCAN
TONE M/CALL V/ MHz
DIGITAL PRIO AO BUSY
T-SCAN PRIO SCAN
TONE M/CALL V/ MHz