Icom IC-2200H Instruction Manual page 41

D Memory/call➪call/memory
q Select the memory/call channel to be transferred.
➥ Push [M/CALL
PRIO ] to select memory mode, then ro-
tate [DIAL] to select the desired memory channel.
➥ Push [M/CALL
PRIO ] for 1 sec. to select the call channel.
w Push [S.MW
MW ] momentarily.
• "M" indicator and "– –" indication blink, and shows VFO condi-
tions.
e Rotate [DIAL] to select the target memory channel.
• "C" blinks when the call channel is selected.
• Scan edge channels, 1A/1b, 2A/2b, 3A/3b, can also be selected.
r Push [S.MW
MW ] for 1 sec. to transfer the selected mem-
ory/call channel contents to the target memory.
• The targeted memory and transferred contents are indicated.
[EXAMPLE]: Transferring memory channel 30 contents to channel 31.
Front panel operation:
Select the memory channel, then push
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN PRIO
S ET
MONI LOW TONE M/CALL V/ MHz
HM-133V operation:
Select the memory channel, push
S.MW MW
Select the target channel.
.
AO BUSY
MUTE
NAR
MID
LOW
SCAN PRIO SCAN LOCK
S ET
M/CALL V/ MHz
then push .
z Select the memory/call channel to be trans-
MR/CALL
ferred.
➥ Push [MR/CALL] to select memory mode,
then select the desired memory channel
MW
via [Y Y ]/[Z Z ] or keypad.
➥ Push [MR/CALL] for 1 sec. to select the
call channel.
[Y]/[Z]
x Push [FUNC], then [
• "M" indicator and "– –" indication blink, and shows
VFO conditions.
c Push [Y Y ]/[Z Z ] to select the target memory
channel.
• "C" blinks when the call channel is selected.
• Scan edge channels can also be selected.
• The keypad cannot be used for the selection.
v Push [FUNC] then push [
1 sec. to transfer the selected memory/call
channel contents to the target memory.
• The targeted memory and transferred contents
are indicated.
DIGITAL PRIO AO BUSY
ANM DUP T-SCAN PRIO SCAN
MONI LOW TONE M/CALL V/ MHz
MEMORY OPERATION
A(MW)] momentarily.
CLR
A(MW)] for
CLR
S.MW MW
Push for 1 sec.
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN PRIO SCAN
S ET
MONI LOW TONE M/CALL V/ MHz
Push then push for 1 sec.
5
5
28