Icom IC-2200H Instruction Manual page 90

13
OTHER FUNCTIONS
D D Channel skip setting
Sets channel skip setting from ON and OFF for memory skip
scan operation.
This item appears when set mode is accessed from memory
mode only.
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN
S ET
MONI LOW TONE
Scans the memory channel.
(does not skip; default)
D D Memory bank setting
Sets the desired memory bank (A to J and OFF) to assign the
regular memory channels.
This item appears when set mode is accessed from memory
mode only.
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN
S ET MONI LOW TONE
77
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
PRIO SCAN LOCK ANM DUP T-SCAN
S ET
M/CALL V/ MHz MONI LOW TONE
Does not scan the memory
channel (skips).
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
PRIO SCAN LOCK ANM DUP T-SCAN
M/CALL V/ MHz S ET MONI LOW TONE
D D Memory bank link function
Sets the memory bank link function ON and OFF (default).
The link function provides continuous banks scan, that scans
all contents in the selected banks during bank scan.
This item appears when set mode is accessed from memory
mode only.
MUTE
NAR
PRIO SCAN
MID
M/CALL V/ MHz
LOW
LOCK ANM DUP
S ET
MONI LOW
• Bank link setting
q Rotate [DIAL] to select the memory bank link function ON.
w Push [SET] or [MONI] to select the desired bank to be
linked.
• BLA: Bank A, BLB: Bank B, BLC: Bank C, BLD: Bank D,
BLE: Bank E, BLF: Bank F, BLG: Bank G, BLH: Bank H,
BLI: Bank I, BLJ: Bank J
PRIO SCAN
M/CALL V/ MHz
MUTE
NAR
MID
LOW
LOCK ANM DUP
S ET MONI LOW
e Rotate [DIAL] to select "ON" to linking the bank.
r Repeat steps w and e to set the link condition.
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
T-SCAN PRIO SCAN LOCK ANM DUP
S ET
TONE M/CALL V/ MHz MONI LOW
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
T-SCAN PRIO SCAN LOCK ANM DUP
TONE M/CALL V/ MHz S ET MONI LOW
DIGITAL PRIO AO BUSY
T-SCAN PRIO SCAN
TONE M/CALL V/ MHz
DIGITAL PRIO AO BUSY
T-SCAN PRIO SCAN
TONE M/CALL V/ MHz