I Programming A Call Channel; Call Channel Operation - Icom IC-2200H Instruction Manual

I Programming a call channel

Operating frequency, duplex information, subaudible tone in-
formation (tone encoder or tone squelch ON/OFF and its fre-
quency) and alphanumeric channel names can also be
programmed into the call channel.
q Set the desired frequency in VFO mode.
➥ Push [V/MHz
SCAN ] to select VFO mode.
➥ Set the frequency using [DIAL].
➥ Set other data as desired.
w Push [S.MW
MW ] momentarily.
e Rotate [DIAL] to select the call channel
• "M" indicator and "C" blink.
[EXAMPLE]: Programming 145.120 MHz into the call channel via the microphone.
Push to select VFO mode.
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN PRIO
S ET
MONI LOW TONE M/CALL
Push until large "C" appears.
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN
S ET MONI LOW TONE
Set the frequency.
MUTE
NAR
MID
LOW
SCAN LOCK ANM
S ET
V/ MHz MONI LOW
Push
MUTE
NAR
MID
LOW
PRIO SCAN LOCK
M/CALL V/ MHz S ET

CALL CHANNEL OPERATION

r Push [S.MW
MW
• 3 beeps sound and the unit returns to VFO mode automatically.
z Set the desired frequency in VFO mode.
➥ Push [VFO/LOCK] to select VFO mode.
VFO/CALL
➥ Set the frequency.
➥ Set other data as desired.
MW
x Push [FUNC], then [
c Select the call channel via [Y Y ] or [Z Z ].
v Push [FUNC] then [
[Y]/[Z]
program.
• 3 beeps sound and the unit returns to VFO mode
automatically.
DIGITAL PRIO AO BUSY
DUP T-SCAN PRIO SCAN
TONE M/CALL V/ MHz
➠
then for 1 sec.
"
DIGITAL PRIO AO BUSY
"
"
ANM DUP T-SCAN PRIO SCAN
MONI LOW TONE M/CALL V/ MHz
] for 1 sec. to program.
A(MW)] momentarily.
CLR
A(MW)] for 1 sec. to
CLR
Push , then momentarily.
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN PRIO
S ET
MONI LOW TONE M/CALL V/ MHz
"
DIGITAL PRIO AO BUSY
Beep
MUTE
Beep
NAR
MID
Beep
LOW
LOCK ANM DUP T-SCAN
"
S ET MONI LOW TONE
6
6
SCAN
PRIO SCAN
M/CALL V/ MHz
36