I Subaudible Tones - Icom IC-2200H Instruction Manual

4
REPEATER OPERATION

I Subaudible tones

(Encoder function)
D Subaudible tones
q Select the mode/channel you wish to set the subaudible
tones to, such as VFO mode or memory/call channel.
w Push [SET
LOCK
e Push [SET] or [MONI] several times until " " and "rt" ap-
pears; or until " " and "Ct" appears for tone squelch or
pocket beep use.
• When "d" is displayed in place of the 100 MHz digit, cancel the
DTMF memory encoder in advance. (p. 46)
r Rotate [DIAL] to select and set the desired subaudible fre-
quency.
t Push any key other than [SET] or [MONI] to exit set mode.
NOTE: The subaudible tone encoder frequency can be set
in a memory/call channel temporarily. However, the set fre-
quency is cleared once another memory channel or VFO
mode is selected. To store the tone frequency permanently,
overwrite the channel information.
19
SET MODE
USING
] to enter set mode.
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN
S ET MONI LOW TONE
z Set the mode/channel you wish to set the sub-
SET
B
x Push [
c Push [
PRIO SCAN
M/CALL V/ MHz
v Push [Y Y ] or [Z Z ] to select and set the desired
b Push [
• Subaudible tone frequency list
67.0 79.7
69.3 82.5
71.9 85.4
74.4 88.5
77.0 91.5
audible tones to, such as VFO mode or mem-
ory/call channel.
• The subaudible tone frequency is independently pro-
grammed into each mode or channel.
B(D-OFF)] to enter set mode.
SET
B(D-OFF)] or [
SET ENT
times until " " and "rt" appears; or until " " and
"Ct" appears for tone squelch or pocket beep
use.
• When "d" is displayed in place of the 100 MHz digit,
cancel the DTMF memory encoder in advance. (p. 46)
MUTE
NAR
MID
Push
LOW
LOCK ANM
S ET MONI
subaudible tone frequency.
• Push and hold [Y Y ]/[Z Z ] to change the above tones
continuously.
A(MW)] to exit set mode.
CLR
94.8 110.9 131.8 156.7 171.3
97.4 114.8 136.5 159.8 173.8
100.0 118.8 141.3 162.2 177.3
103.5 123.0 146.2 165.5 179.9
107.2 127.3 151.4 167.9 183.5
C(T-OFF)] several
DIGITAL PRIO AO BUSY
DUP T-SCAN PRIO SCAN
LOW TONE M/CALL V/ MHz
(unit: Hz)
186.2 203.5 229.1
189.9 206.5 233.6
192.8 210.7 241.8
196.6 218.1 250.3
199.5 225.7 254.1