Icom IC-2200H Instruction Manual page 77

D D To reply a call
q Push [BANK
OPT ] or [V/MHz] several times to select the
call sign select mode.
• "YUC" appears for station call sign.
• "R1C" or "R2C" appears for repeater call sign.
DIGITAL
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN
S ET MONI LOW TONE
w Rotate [DIAL] to select the blank channel or erasable
channel.
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN
S ET MONI LOW TONE
e Push
[BANK OPT ]
three times to select the received call in-
dication.
r To confirm the received call, push [SET] or [MONI] to enter
the received call sign indication mode.
DIGITAL
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN
S ET MONI LOW TONE
tPush [S.MW
MW ] for 1 sec. to store the call sign into the
selected station call sign channel.
yPush and hold [PTT] to reply a call.
PRIO AO BUSY
PRIO SCAN
M/CALL V/ MHz
PRIO SCAN
M/CALL V/ MHz
PRIO AO BUSY
PRIO SCAN
M/CALL V/ MHz
DIGITAL MODE OPERATION
z Push [BANK/OPTION] or [MR/CALL] to
BANK/OPTION
select the call sign select mode.
• "YUC" appears for station call sign.
• "R1C" or "R2C" appears for repeater call sign.
x Push [Y Y ] or [Z Z ] to select the blank chan-
nel or erasable channel.
c
[BANK/OPTION]
Push
the received call indication.
v To confirm the received call, push
[ B(D-OFF)] or [
SET
the received call sign indication mode.
b Push [FUNC] then [
to store the call sign into the selected sta-
tion call sign channel.
n Push and hold [PTT] to reply a call.
12
three times to select
C(T-OFF)] to enter
ENT
A(MW)] for 1 sec.
CLR
12
64