Icom IC-2200H Instruction Manual page 31

z Set the receive frequency (repeater output fre-
DUP–
quency). (pgs. 9, 10)
7
x Push [
– 7(TONE)] to select minus duplex;
DUP
push [ + 8(TSQLS
DUP
DUP+
8
Push
Push
c Push [FUNC] then [
the subaudible tone encoder according to re-
peater requirements.
• Refer to p. 19 for the tone frequency setting.
• When the repeater requires a different tone system,
see p. 20.
Push ,
then .
v Push and hold [PTT] to transmit.
b Release [PTT] to receive.
n Push [
1(ANM)] to check whether the other
MONI
station's transmit signal can be received directly.
S )] to select plus duplex.
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN PRIO SCAN
S ET MONI LOW TONE M/CALL V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN PRIO SCAN
S ET MONI LOW TONE M/CALL V/ MHz
– 7(TONE)] to turn ON
DUP
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN PRIO SCAN
S ET MONI LOW TONE M/CALL V/ MHz
REPEATER OPERATION
m Push [
9(TSQL)] to return to simplex oper-
SIMP
SIMP
ation.
9
• "+" or "–" indicator disappears.
, To turn OFF the subaudible tone encoder, push
[FUNC] then [
ENT
4
C(T-OFF)].
4
18