I Memory Bank Selection - Icom IC-2200H Instruction Manual

I Memory bank selection

The IC-2200H has a total of 10 banks (A to J). Regular mem-
ory channels, 0 to 199, are assigned into the desired bank for
easy memory management.
q Push [M/CALL
PRIO ] to select memory mode.
w Push [BANK
OPT ] to select memory bank condition.
• Bank initial blinks
[DIAL]
[BANK OPT
e Rotate [DIAL] to select the desired bank, A to J.
• Banks that have no programmed contents are skipped.
r Push [BANK
OPT ] to set the bank.
• Initial stops blinking.
t Rotate [DIAL] to select the contents in the bank.
• No channel numbers are displayed for memory bank operation.
y To
return to regular
[BANK OPT ] twice.
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN PRIO SCAN
S ET MONI LOW TONE M/CALL V/ MHz
]
memory condition, push
MEMORY OPERATION
z Push [MR/CALL] to select memory mode.
BANK/OPTION
x Push [BANK/OPTION] to select memory
bank condition.
• Bank initial blinks
c Push [Y Y ]/[Z Z ] to select the desired bank, A
to J.
• Only programmed memory bank can be se-
lected.
v Push [
[Y]/[Z]
CLR
• Initial stops blinking.
b Push [Y Y ]/[Z Z ] to select the desired con-
tents in the bank.
• No channel numbers are displayed for memory
bank operation.
n To return to regular memory condition,
push [BANK/OPTION] then [
A(MW)] to set the bank.
A(MW)].
CLR
5
5
32