Specifications - Icom IC-2200H Instruction Manual

GENERAL
• Frequency coverage :
USA, Asia, Australia
Europe
Europe-1, Taiwan, Korea
*Guaranteed: 144–148 MHz range only.
• Type of emission : FM, AM (Receive only)
• Number of memory channels : 207 (incl. 6 scan edges and 1 call)
• Frequency resolution : 5, 10, 12.5, 15, 20, 25, 30, 50 kHz
• Operating temperature range : –10°C to +60°C; +14˚F to +140˚F
• Frequency stability : ±10 ppm
• Power supply requirement : 13.8 V DC ±15%
• Current drain
(at 13.8 V DC: approx.)
Transmit
Receive
• Antenna connector : SO-239
: 140(W) × 40(H) × 146(D) mm
• Dimensions
(proj. not included)
• Weight (approx.) : 1.25 kg; 2 lb 12 oz
TRANSMITTER
• Modulation system : Variable reactance frequency mod.
• Output power :
(*approx., † Korea version)
All stated specifications are subject to change without notice or obligation.
(unit: MHz)
Tx: 144–148/Rx: 118–174*
Tx: 144–146/Rx: 118–174*
Tx/Rx: 144–146
(–10°C to +60°C)
:
at 65 W 15 A
standby 0.8 A
max. audio 1.0 A
(50 Ω)
1 9 3
5 ⁄ (W)×1 ⁄ (H)×5 ⁄ (D) in
2 16 4
Power output
Power
Selection
Taiwan
High
65 W (50 W † ) 24 W
Middle 25 W* 10 W*
Mid. low
10 W* N/A
Low
5 W* 5 W*

SPECIFICATIONS

• Max. frequency deviation : ±5.0 kHz
• Spurious emissions : Less than –60 dBc
• Microphone connector : 8-pin modular
RECEIVER
• Receive system : Double-conversion superheterodyne
• Intermediate frequencies : 1st: 21.7 MHz, 2nd: 450 kHz
• Sensitivity : 0.14 µV typical
(at 12 dB SINAD)
• Squelch sensitivity : 0.1 µV typical
(threshold)
• Selectivity :
[Wide]
[Narrow]
‡
• Spurious and image rejection : 75 dB typical
• AF output power : More than 2.4 W
(at 13.8 V DC)
• Ext. speaker connector : 3-conductor 3.5 (d) mm (
• Ext. Data connector : 3-conductor 2.5 (d) mm (
‡ Some version only
14
/±2.5 kHz
[Wide] [Narrow]
(600 Ω)
More than ±6 kHz/6 dB
Less than ±14 kHz/60 dB
More than ±3 kHz/6 dB
Less than ±9 kHz/55 dB
at 10% distortion with
an 8 Ω load
")/8 Ω
1
⁄
8
")
1
⁄
8
‡
13
14
88